Innovation in Motion

Product Configurator

Welcome to the Kyntronics Product Configurator.

Please use the selectors opposite to filter the products below for your specific application.

If you are unable to find what you require please call us on 440-220-5990

Form by ChronoForms - ChronoEngine.com

80mm Hydraulic Power Unit Only - Customer supplied Motor & Drive

Hydraulic Power Unit (Stand-Alone)
Power Unit Only (Customer supplied drive & motor)
Up to 9.88cc/rev displacement
  • Up to 2.28cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)

80mm Hydraulic Power Unit (Motor Only) - Customer supplied drive

Hydraulic Power Unit (Stand-Alone)
Motor Only (Customer supplied drive)
Up to 2.28cc/rev displacement
  • DC Brushless Motor
  • Up to 2.28cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)

Actuator Only with 120mm Power Unit & 5in Hydraulic Cylinder - - Motor & Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Motor & Actuator
Thru 58,900lbf (262kN) up to 2.5in/s (6.4cm/s) (120mm PU)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Motor & Drive / Controller supplied / setup by the customer

Motor & Actuator Solution with 120mm Power Unit & 80mm Hydraulic Cylinder - Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Motor & Actuator
Thru 9,400lbf (41,8kN) up to 46in/s (117cm/s) (120mm PU)
  • DC Brushless Motor
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Drive / Controller supplied by the customer

Actuator & Motor Only 5in load cylinder - 1in fast cylinder 120mm Power Unit (Customer Supplied Drive)

Press / Clamp Actuation
Actuator & Motor Only (Customer supplied drive)
Thru 58,900lbf (262kN) up to 40in/s (102cm/s)
  • 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Position Feedback (0-10vdc)
  • Force Feedback (Pressure Sensors) – (0-10vdc)
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Multiple Actuator Coordination
  • Setup / Run - - Software (Free)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

* Max Ram (“No Load) weight: 1,400lbf each actuator) - continuous duty rated

120mm Hydraulic Power Unit (Motor & Drive)

Hydraulic Power Unit (Stand-Alone)
Drive & Motor
Up to 9.88cc/rev displacement
  • DC Brushless Motor
  • Drive / Controller
  • Up to 9.88cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Actuator Only with 120mm Power Unit & 120mm Hydraulic Cylinder - - Motor & Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Actuator Only
Thru 24,800lbf (110kN) up to 6.7in/s (17cm/s) (120mm PU)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Motor & Drive / Controller supplied / setup by the customer

Motor & Actuator Solution with 80mm Power Unit & 80mm Hydraulic Cylinder - Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Motor & Actuator
Thru 9,400lbf (41,8kN) up to 38in/s (96.5cm/s) (80mm PU)
  • DC Brushless Motor
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Drive / Controller supplied by the customer

Actuator & Motor Only 3.25in load cylinder - 1in fast cylinder 120mm Power Unit (Customer Supplied Drive)

Press / Clamp Actuation
Actuator & Motor Only (Customer supplied drive)
Thru 24,800lbf (110kN) up to 40in/s (102cm/s)
  • 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Position Feedback (0-10vdc)
  • Force Feedback (Pressure Sensors) – (0-10vdc)
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Multiple Actuator Coordination
  • Setup / Run - - Software (Free)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

80mm Hydraulic Power Unit (Motor & Drive)

Hydraulic Power Unit (Stand-Alone)
Drive & Motor
Up to 2.28cc/rev displacement
  • DC Brushless Motor
  • Drive / Controller
  • Up to 2.28cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Actuator Only with 80mm Power Unit & 120mm Hydraulic Cylinder - Motor & Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Actuator Only
Thru 9,400lbf (41,8kN) up to 46in/s (117cm/s) (120mm PU)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Motor & Drive / Controller supplied / setup by the customer

All-in-One Actuation Solution with 120mm Power Unit & 5in Hydraulic Cylinder

Linear Products (up to 120in (304cm) Stroke)
allinone
Thru 58,900lbf (262kN) up to 2.5in/s (6.4cm/s) (120mm PU)
  • 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
    • I/O Control – (with selectable indexes)
    • 4-20ma & 0-10Vdc Reference/Set-point Follower
    • Limit Switch Outputs

All-In-One Solution 5in load cylinder - 1in fast cylinder 120mm Power Unit

Press / Clamp Actuation
allinone
Thru 58,900lbf (262kN) up to 40in/s (102cm/s)
  • 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Force Feedback (Pressure Sensors)
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Multiple Actuator Coordination
  • Setup / Run - Software (Free)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

* Max Ram (No Load) weight: 1,400lbf each actuator) - continuous duty rated

Separated - 120mm Hydraulic Cylinder with remote 120mm Power Unit & Drive / Controller

Linear Products (up to 120in (304cm) Stroke)
Separated - Hydraulic Cylinder
Thru 24,800lbf (110kN) up to 6.7in/s (17cm/s) (120mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Actuator Only with 80mm Power Unit & 80mm Hydraulic Cylinder - Motor & Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Actuator Only
Thru 9,400lbf (41,8kN) up to 38in/s (96.5cm/s) (80mm PU)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Motor & Drive / Controller supplied / setup by the customer

All-in-One Actuation Solution with 120mm Power Unit & 120mm Hydraulic Cylinder

Linear Products (up to 120in (304cm) Stroke)
allinone
Thru 24,800lbf (110kN) up to 6.7in/s (17cm/s) (120mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
    • I/O Control – (with selectable indexes)
    • 4-20ma & 0-10Vdc Reference/Set-point Follower
    • Limit Switch Outputs

All-In-One One Solution 3.25in load cylinder - 1in fast cylinder 120mm Power Unit

Press / Clamp Actuation
allinone
Thru 24,800lbf (110kN) up to 40in/s (102cm/s)
  • 240Vac or 480Vac
  • 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Force Feedback (Pressure Sensors)
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Multiple Actuator Coordination
  • Setup / Run - - Software (Free)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

* Max Ram (No Load) weight: 1,400lbf each actuator) - continuous duty rated

Separated - 5in Hydraulic Cylinder with remote 120mm Power Unit & Drive / Controller

Linear Products (up to 120in (304cm) Stroke)
Separated - Hydraulic Cylinder
Thru 58,900lbf (262kN) up to 2.5in/s (6.4cm/s) (120mm PU)
  • 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Motor & Actuator Solution with 120mm Power Unit & 120mm Hydraulic Cylinder - Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Motor & Actuator
Thru 24,800lbf (110kN) up to 6.7in/s (17cm/s) (120mm PU)
  • DC Brushless Motor (120mm, 130mm or 176mm)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Drive / Controller supplied by the customer

All-In-On Actuation Solution with 120mm Power Unit & 80mm Hydraulic Cylinder

Linear Products (up to 120in (304cm) Stroke)
allinone
Thru 9,400lbf (41,8kN) up to 46in/s (117cm/s) (120mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
    • I/O Control – (with selectable indexes)
    • 4-20ma & 0-10Vdc Reference/Set-point Follower
    • Limit Switch Outputs

120mm Hydraulic Power Unit (Motor Only) - Customer supplied drive

Hydraulic Power Unit (Stand-Alone)
Motor Only (Customer supplied drive)
Up to 9.88cc/rev displacement
  • DC Brushless Motor
  • Up to 9.88cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)

Separated - 80mm Hydraulic Cylinder with remote 120mm Power Unit & Drive / Controller

Linear Products (up to 120in (304cm) Stroke)
Separated - Hydraulic Cylinder
Thru 9,400lbf (41,8kN) up to 46in/s (117cm/s) (120mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Motor & Actuator Solution with 120mm Power Unit & 5in Hydraulic Cylinder - Drive / Controller supplied by the customer

Linear Products (up to 120in (304cm) Stroke)
Motor & Actuator
Thru 58,900lbf (262kN) up to 2.5in/s (6.4cm/s) (120mm PU)
  • DC Brushless Motor (130mm or 176mm)
  • Position Feedback (0-10vdc)
  • Clutch – Relief Valve
  • Pressure Sensors – Force Control, 0-10vdc - (Opt)
  • Manual Release (Opt)
  • Drive / Controller supplied by the customer

All-In-One Actuation Solution with 80mm Power Unit & 80mm Hydraulic Cylinder

Linear Products (up to 120in (304cm) Stroke)
allinone
Thru 9,400lbf (41,8kN) up to 38in/s (96.5cm/s) (80mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
    • I/O Control – (with selectable indexes)
    • 4-20ma & 0-10Vdc Reference/Set-point Follower
    • Limit Switch Outputs

80mm Hydraulic Power Unit Only - Customer supplied Motor & Drive

Hydraulic Power Unit (Stand-Alone)
Power Unit Only (Customer supplied drive & motor)
Up to 2.28cc/rev displacement
  • Up to 2.28cc/rev Reversible Pump
  • Hoses Sold Separately
  • Accumulator quoted needed
  • Position control device quoted needed
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)

Separated - 80mm Hydraulic Cylinder with remote 80mm Power Unit & Drive / Controller

Linear Products (up to 120in (304cm) Stroke)
Separated - Hydraulic Cylinder
Thru 9,400lbf (41,8kN) up to 38in/s (96.5cm/s) (80mm PU)
  • 120Vac, 240Vac or 480Vac - 1 phase or 3 phase
  • DC Brushless Motor
  • Drive / Controller (Factory setup to your parameters)
  • Position Feedback
  • Clutch – Relief Valve
  • Pre-programmed Indexes
  • Setup / Run - - Software (Free)
  • SAE Hose / connections (up to 10ft)
  • Pressure Sensors – Force Control (Opt)
  • Manual Release (Opt)
  • Field Bus (Opt)
  • Control Inputs / Outputs (Opt)
  • I/O Control – (with selectable indexes)
  • 4-20ma & 0-10Vdc Reference/Set-point Follower
  • Limit Switch Outputs

Kyntronics
34700 Lakeland Blvd.
Eastlake,
OH 44095

phone: 440-220-5990
toll free (US only) 855-596-8765
fax: 440-951-2336

© 2017 Kyntronics. All Rights Reserved. Sitemap

NSF ISR MarkANAB Mark

Product Configurator

Applications