Design and Optional Features for P-Series Servo Power Unit Total Solution Systems

The Servo Power Unit connects to a customer-supplied cylinder or rotary actuator through robust quick connect fittings. The SPU can be located close to the cylinder reducing footprint and hose length and it operates both linear cylinders and rotary actuators.

P-Series Power Unit Total Solution Design Features

  • Motor mounting adaptor and shaft coupling for customer-supplied motors.
  • AC and DC motor compatible
  • Power-on-demand, efficient operation saves energy.
  • Precise servo control using external position sensor and integral pressure transducer. Smooth control eliminates abrupt flow changes and stress on hoses and connections.
  • Dynamic braking for smooth control of over-riding loads.
  • Closed system eliminates contamination, moisture and air infiltration. Minimal fluid.
  • Works with most any double-acting linear cylinder or rotary actuator.
  • Standard ISO 16028 3/8” cylinder connections.
  • Up to 10.3 GPM (43.2 LPM) at 3,000 PSI.
  • Adjustable relief valves (extend and retract) eliminate over pressure.
p series product design features
  1. Customer-supplied cylinder or rotary motor and hoses
  2. Rod compensation reservoir
  3. Fill ports
  4. Quick connect couplings
  5. External linear position sensor (mounted to machine)
  6. Servo motor
  7. Servo drive subpanel

 

P-Series Servo Power Unit Optional Features

  • Locking solenoid valves (extend and/or retract).
  • Counterbalance valves (extend and/or retract).
  • Pressure transducers (extend and/or retract).
  • Float Mode.
  • Standard or high-resolution position sensor.
  • Pressure sensor for force measurement and control.
  • Food grade fluid
  • IP67, IP68, IP69k packaging.
  • Special coatings
P Series Optional Features
  • 1. Pressure sensors for force measurement
  • 2. Solenoid vavle
  • 3. Quick-connect couplings

 

<< Back to Main Products Page